Swiss Digital Fuse Box Only

This listing only contains the Fuse Box of the SDFB without the Sluggo and Piggy Tail. If you wish to buy the complete SDFB please proceed HERE.

To fully understand the potential benefits of Swiss Digital Fuse Box, we must first examine the pitfalls of the fuse.

A fuse is a simple, sacrificial device used to protect your component in case of electrical failure. When current is being drawn through the fuse, it begins to heat up, and in cases of excess current or short, it will melt and sever the connection to power. While this works to protect your devices, a common fuse leaves much to be desired in means of performance when it comes to our audio components. 

Regardless of the size of the power cable feeding even your largest amplifiers, the live line feeding the power supply eventually becomes constricted to the single small filament housed in the fuse. Current draw through the filament causes heat, which in turn raises the resistance and limits the capability of the power supply as it digs deep to replenish its reserves in times of high demand and musical transients. 

Our elegant solution is the Swiss Digital Fuse Box. After carefully reading the instructions, the restrictive fuse is replaced with a Sluggo, a very low resistance and high current capable metal rod made from high purity materials. Run a power cable from the wall to the Swiss Digital Fuse Box IEC C13 inlet, and then plug your component into the Fuse Box’s NEMA 15 receptacle and you are ready to experience what the Fuse Box has to offer. 

Each Fuse Box is programmed at the time of ordering to match the manufacturer’s fuse specification for your device. An internal microcontroller magnetically monitors the current draw and opens the circuit via a low resistance relay if it exceeds the pre-programmed setting. Resetting the Swiss Digital Fuse Box if tripped is done simply by disconnecting it from the wall for a minimum of 15 seconds. Fuse Box will not lose its programming ever, and will continue to protect your device faithfully and without fault. 

Please Note: We can program Swiss Digital Fuse Box for the voltage and frequency of your country, but all Fuse Boxes have a US style plug output and will require the appropriate power cable. Please see our Piggy Tail power cables if you need a short length cable for this purpose. 

Try the Swiss Digital Fuse Box for yourself in your own home. All products sold by Vera-Fi Audio are covered by a 30 day money back guarantee should you be dissatisfied in any way.

Watch this video to learn more!